Medical Supplies Division

List of Medical Items



Stock code Category Item name
1. 40400502 Diagnostic Item

ATC Code :
Item type : Complementary
Institute level :
Unit of measure : VIAL
VEN :
Specification :
2. 13822001 Surgical

ATC Code :
Item type : Regular
Institute level : 2
Unit of measure : NOS
VEN : E
Specification :
3. 13822002 Surgical

ATC Code :
Item type : Regular
Institute level : 2
Unit of measure : NOS
VEN : E
Specification :
4. 10000503 Surgical 6/0 w,Polyglactin 91013mm hc rb tp ndl

ATC Code :
Item type : Complementary
Institute level : 1
Unit of measure : NOS
VEN : N
Specification : Surgical Suture,polyglactin 910, Coated, Braided, Absorbable Synthetic Surgical Suture BP/USP Standard or Equivalent
standards, Gauge size 6/0,45cm-75cm length attached to a 13mm (approx.) half circle round bodied taper point needle.Each
sterile suture packed individually in peel open foil and peel/tear open over wrap and labeled accordingly.
5. 14500404 Surgical Bandage Crepe 5cmx3m Roll

ATC Code :
Item type : Regular
Institute level : 2
Unit of measure : ROLL
VEN : E
Specification : Cotton Crepe Bandage BP (1988)
With clips. Any colour
Size:
Stretched Length - 3m (Roll)
Finished width - 5cm
Note:
Shelf life of the product should be minimum of 24 months.

Pack:
Individually packed in polythene wrappers.
Marks & Nos:
1. Name of manufacturer, Item discription, batch No., SR No., State Mark, Date of manufacturer and expiry(Year to be
marked in four digits)
2. MSD order No. & SPC indent No. should be stated on inner/outer pack
6. 14330001 Surgical Biospecific affinity column

ATC Code :
Item type : Complementary
Institute level : 4
Unit of measure : NOS
VEN : N
Specification : Biospecific affinity column.
7. 11404002 Surgical Cartridges for Curved cutter 40mm x 4.8mm,Green

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : Cartridges for Curved Cutter Device, Size 40mm length,4.8mm height (Green)Sterile
8. 21600502 Surgical Dermatome w/mesher copm.set10 tray,100blades

ATC Code :
Item type : Complementary
Institute level : 4
Unit of measure : NOS
VEN : N
Specification : Dermatome with mesher complete set with 10 trays,100 Nos sterile blades, stainless steel with warranty
9. 00110001 Pharmaceutical Efavirenz 600 mg, + Emtricitabine 200 mg, +Tenofovir 300 mg tablet

ATC Code :
Item type : Complementary
Institute level : 5
Unit of measure : TAB
VEN : E
Specification : Efavirenz 600 mg, Emtricitabine 200 mg,Tenofovir disoproxil (as fumarate) 300
mg,tablet
Each film coated tablet to contain 200mg of Emtricitabine , 600 mg, of
Efavirenz usp and 300mg of Tenofovir Disoproxil Fumarate equivalent to
Tenofovir Disoproxil 245mg
10. 15313001 Surgical Endo.Mucosal Resect.BandinDevice Complete Set - SG

ATC Code :
Item type : Complementary
Institute level : 4
Unit of measure : NOS
VEN : E
Specification : Endoscopic Mucosal Resection Banding Device Complete Set - Standard Gastroscope -
Endoscopic Mucosal Resection banding device with 6 bands, compatible with 9 mm - 9.9mm diameter gastroscopes, bands
release Applicator, stiff small hexagenol snare device with pathology kit, sterile.
11. 13801706 Surgical Endotracheal Tube Holder used with ET tube size 5mm

ATC Code :
Item type : Regular
Institute level : 3
Unit of measure : NOS
VEN : E
Specification : Endotracheal Tube Holder
Allow fast & easy application quick fixation
Integrated bite block, Cushioned material to prevent skin irritation, Should not block the oral cavity, allow insertion
of NG tube Rubber/ touch fastner, strap/ hook to adjust position.
To be used with ET tube size 5mm & above
12. 13004601 Surgical Forcep, end grasping for vitreo retinal surgery, 23G

ATC Code :
Item type : Complementary
Institute level : 4
Unit of measure : NOS
VEN : E
Specification : Forceps, end grasping, for vitreoretinal surgery, size 23G, compatible with Grieshaber type handle, sterile.
13. 20206610 Surgical Forceps, fine, Adson withouttoothed jaws, 120mm

ATC Code :
Item type : Regular
Institute level : 4
Unit of measure : NOS
VEN : E
Specification : Forceps, fine, Adson, without toothed jaws, 120mm (approx.) length, stainless steel.(for plastic surgery)
14. 20201409 Surgical Forceps, fine,Micro- Adson1 x 2 toothed jaws, 120mm

ATC Code :
Item type : Regular
Institute level : 4
Unit of measure : NOS
VEN : E
Specification : Forceps, fine,Micro- Adson, 1 x 2 toothed jaws, 120mm (approx.) length, stainless steel(for plastic surgery)
15. 15310201 Surgical Foreign Body GraspingForcep, Rat Tooth

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : E
Specification : Foreign Body Grasping Forcep: Rat tooth , Rotatable type, working length 240cm (approx,), minimum working channel
diameter 2.8mm, jaw opening 10-12mm, sterile.
16. 23100601 Surgical Forester clamp,crv left,hightension,s.shaft 10mm,20mm ovalring jaws,19cm

ATC Code :
Item type : Complementary
Institute level : 4
Unit of measure : NOS
VEN : N
Specification : Forester clamp, high tension, curved left, sliding shaft 10mm, 20 mm oval ring jaws with ratchet, working length 19 cm
17. 22400103 Surgical Hammer,post mortem

ATC Code :
Item type : Regular
Institute level : 2
Unit of measure : NOS
VEN : E
Specification : Hammer with Wrench end, post mortem, stainless steel.
18. 21200115 Surgical LC-DCP & DCP Basic instru.Set

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : E
Specification : LC-DCP & DCP Basic instrument set, stainless steel, in sterilization tray.
19. 20401015 Surgical Needle Holder, De Bakey,str.0.2mm serated jaw,TC,14cm-18mmw/rachet

ATC Code :
Item type : Complementary
Institute level : 4
Unit of measure : NOS
VEN : N
Specification : Castroviejo Needle Holder, De Bakey , straight, jaws with 0.2mm serrations, with tungsten carbide inserted, 14cm-18cm
length, with rachet/lock, stainless steel for vascular and transplant surgery
20. 43601602 Diagnostic Item One Lambda LABScreen NegativeControl One Lam.Lum3D (Model:FLEXMAP 3D) & HLA Fusion Soft.

ATC Code :
Item type : Complementary
Institute level : 5
Unit of measure : KIT
VEN : E
Specification : One Lambda LABScreen Negative Control for One Lambda Luminex3D (Model: FLEXMAP 3D) & HLA Fusion Software
21. 43601502 Diagnostic Item One Lambda PE-Conjugated GoatAnti-H.IgG One Lam.Lum3D(ModelFLEXMAP 3D) & HLA Fusion Soft

ATC Code :
Item type : Complementary
Institute level : 5
Unit of measure : KIT
VEN : E
Specification : One Lambda PE-Conjugated Goat Anti-Human IgG for One Lambda Luminex3D (Model: FLEXMAP 3D) & HLA Fusion Software
22. 43601402 Diagnostic Item One Lambda PE-Conjugated StreOne Lam.Lum3D (Model: FLEXMAP3D) & HLA Fusion Soft.

ATC Code :
Item type : Complementary
Institute level : 5
Unit of measure : KIT
VEN : E
Specification : One Lambda PE-Conjugated Streptavidin for One Lambda Luminex3D (Model: FLEXMAP 3D) & HLA Fusion Software
23. 43600102 Diagnostic Item One Lambda Taq Polymerase forOne Lambda Luminex3D (Model: F LEXMAP 3D) & HLA Fusion Soft

ATC Code :
Item type : Complementary
Institute level : 5
Unit of measure : KIT
VEN : E
Specification : One Lambda Taq Polymerase for One Lambda Luminex3D (Model: F LEXMAP 3D) & HLA Fusion Software
24. 43600101 Diagnostic Item One Lambda Taq Polymerase forOne Lambda Luminex3D (Model: FLEXMAP 3D) & HLA Fusion Soft.

ATC Code :
Item type : Complementary
Institute level : 5
Unit of measure : UL
VEN : N
Specification : One Lambda Taq Polymerase for One Lambda Luminex3D (Model: FLEXMAP 3D) & HLA Fusion Software
25. 13000502 Surgical PGA wrap.bio.orbit. imp 12,14,16,18mm

ATC Code :
Item type : Complementary
Institute level : 4
Unit of measure : NOS
VEN : N
Specification : PGA wrapped bioceramic orbital implant 12,14,16,18mm sterile.
26. 28401314 Surgical pliers wire bendingUnive.Adam

ATC Code :
Item type : Regular
Institute level : 1
Unit of measure : NOS
VEN : N
Specification : Adams Universal wire bending pliers for wire and spring bending forzatoon and
adjustment of take up loops and liable bows stainless steel Ash motor pattern
27. 10000606 Surgical Polyglactin 910,5/0 w13mm hc rb tp ndl

ATC Code :
Item type : Complementary
Institute level : 1
Unit of measure : NOS
VEN : N
Specification : Surgical Suture, polyglactin 910,Coated, Braided, Absorbable Synthetic Surgical Suture BP/USP Standard or Equivalent
standards, Gauge size 5/0,45cm length attached to a 13mm (approx.) half circle round bodied taper point needle and
sterile. Each sterile packed individually in peel open foil and peel/tear open over wrap and labelled accordingly.
28. 23200102 Surgical Satinsky Tangential OcclusionAtraumatic,240mm x76mmSS

ATC Code :
Item type : Complementary
Institute level : 4
Unit of measure : NOS
VEN : N
Specification : Satinsky Tangential Occlusion clamps Debakey type or similar, Atraumatic, Stainless steel, Total length 240mm Jaw length
76mm for vascular and transplant surgery
29. 15800202 Surgical self expanding covered Jstent,20x60mm

ATC Code :
Item type : Complementary
Institute level : 4
Unit of measure : NOS
VEN : E
Specification : self expanding covered J stent,20x60 mm,14x25mm,Sterile
30. 56603202 Diagnostic Item Spatula,stainless steel, withdouble scoop end approximate length , 175mm

ATC Code :
Item type : Regular
Institute level : 1
Unit of measure : NOS
VEN : N
Specification : Spatula,stainless steel, with double scoop end approximate length , 175mm
31. 20206603 Surgical Tissue forcepDe Bakery 1.-2mm,180mm

ATC Code :
Item type : Regular
Institute level : 4
Unit of measure : NOS
VEN : E
Specification : Tissue Forceps, De Bakey, 1mm-2mm jaws, 180mm (approx.) length, stainless steel.
32. 12502201 Surgical Urethr Meatal Dilator plastic, adult

ATC Code :
Item type : Regular
Institute level : 3
Unit of measure : NOS
VEN : E
Specification : Urethral Meatal Dilator plastic, adult size.
33. 15300001 Surgical Wire Guided Eso./ Pylo./Billi.Balloon Dilator.balloon dia.6-8mm

ATC Code :
Item type : Complementary
Institute level : 4
Unit of measure : SET
VEN : E
Specification : Control Radial Expansion Wire Guided Esophageal/Pyloric/Biliary Multi Diameter Balloon Dilator: balloon dia.3 stages
range(6mm-8mm), catheter length 210cm-240cm (approx.), balloon length 5-6cm, catheter dia. 7-8Fr, minimum working
channel dia. 2.8mm, sterile.
34. 12400602 Surgical Wooden Cervical Spatula, Ayre type or similar.

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : Cervical wooden spatula Ayre type(or similar), length 20.6cm, thickness 1mm, disposable.Spatula should be clean, safe
and stiff enough to take Pap smear.
35. 13803503 Surgical Y Connector 22m/15F-22M

ATC Code :
Item type : Regular
Institute level : 1
Unit of measure : NOS
VEN : E
Specification : Y Connector 22m/15F-22M termination with good fit, clear plastic, leur fit ports with retainable caps
36. 21200145 Surgical '8' Ins. Set f/fig. 8 Bone Pla

ATC Code :
Item type : Complementary
Institute level : 4
Unit of measure : NOS
VEN : E
Specification : '8' plate Instrument Set for figure of eight bone plates in sterilizing tray, with 100 implants and 200 screws of
varying sizes and length.
37. 41502901 Diagnostic Item 'Amplitaq' Gold(R)DNApoly+buffer

ATC Code :
Item type : Complementary
Institute level : 5
Unit of measure : UNIT
VEN : N
Specification : 'Amplitaq' Gold(R)DNA polymerase with buffer
38. 12620105 Surgical 'L' buttress plate left 6holes

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : 'L' butress plate 2mm thick left angled for use with 4.5mm & 6.5mm screws size 6
holes x 117mm length, made of implant quality, stainless steel. Packed
individually and labelled accordingly.
39. 12620106 Surgical 'L' buttress plate left 8holes

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : 'L' butress plate 2mm thick left angled for use with 4.5mm & 6.5mm screws size 8
holes x 152mm length, made of implant quality, stainless steel. Packed
individually and labelled accordingly.
40. 12620110 Surgical 'L' buttress plate right 6holes

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : 'L' buttress plates 2mm thick right angled for use with 4.5mm & 6.5mm dia. screw
size 6 hole x 117mm length, made of implant quality, stainless steel. Packed
individually and labelled accordingly.
41. 12620111 Surgical 'L' buttress plate right 7holes

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : 'L' buttress plates 2mm thick right angled for use with 4.5mm & 6.5mm dia. screw
size 7 hole x mm length, made of implant quality, stainless steel. Packed
individually and labelled accordingly.
42. 12620113 Surgical 'L' buttress plate right 8holes

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : 'L' buttress plates 2mm thick right angled for use with 4.5mm & 6.5mm dia. screw
size 8 hole x 152mm length, made of implant quality, stainless steel. Packed
individually and labelled accordingly.
43. 12620109 Surgical 'L' buttress plate, right 4holes

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : 'L' buttress plates 2mm thick right angled for use with 4.5mm & 6.5mm dia. screw
size 4 hole x 88mm length, made of implant quality, stainless steel. Packed
individually and labelled accordingly.
44. 12620081 Surgical 'T' bone plate 2mm thickf.3.5mm,4hx86mm

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : T plate 2mm thick for use with 3.5mm dia. screws,made of implant quality, 4
holes x 86mm, stainless steel. Packed individually and labelled accordingly.
45. 12620082 Surgical 'T' bone plate 2mm x 4h x 84mm

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : T plate 2mm thick for use with 4.5mm & 6.5mm dia. screws, made of implant
quality, 4 holes x 84mm length, stanless steel. Packed individually and labelled
accordingly.
46. 12620078 Surgical 'T' bone plate f. t/h 3hole x68mm

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : T bone plate 2mm thick for use with 4.5mm & 6.5mm dia. screws, made of implant
quality, 3 holes x 68mm length, stanless steel. Packed individually and labelled
accordingly.
47. 12620079 Surgical 'T' bone plate right 4 holes

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : T plate 3.5 mm right angled 4 holes shaft & 4 holes head, 67 mm length,
stainless steel.Packed individually and labelled accordingly.
48. 12620085 Surgical 'T' bone plate right 5 holes

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : T plate 3.5 mm right angled 5 holes shaft & 5 holes head, 39 mm length,
stainless steel.Packed individually and labelled accordingly.
49. 12620072 Surgical 'T' Bone Plate, 3hx3hx40mm

ATC Code :
Item type : Regular
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : Small 'T' Bone Plates Right Angled, for use with 3.5mm diameter Cortical screws
and 4.0mm diameter Cancellous screws,size 3 hole head x 3 hole shaft, 50mm
length, profile 10.0mm width x 1.2mm thickness, made of implant quality
stainless steel.
Unsterile, packed individually and labelled accordingly.
50. 12620086 Surgical 'T' bone plate3.5mm Right,5holes

ATC Code :
Item type : Complementary
Institute level : 3
Unit of measure : NOS
VEN : N
Specification : T-plate 3.5mm right angled, 5 holes shaft, 3 holes head, 67mm length,stainless
steel. Packed individually and labelled accordingly.